broken refs and then fully defined I thought

I created a part "in context" in an assembly. Then I opened the part
up in its own file. I broke the external references and thought that I
went into the sketches and fully defined them. But I am still getting
the >x (indicating that the ref. is broken.
Well if I went into sketch and fully defined the sketch in its own
part, why dont I get the -> for defined in-context?
I thought I did it right.

 

You may need to edit the sketch plane and pick a plane from the part
file. If you created this part file incontext then you might have
selected a plane or surface from the assembly. But moving this sketch
to a different plane in the part file could also cause the part to
move in the assembly.

 

Broken refs are broken but still present in the sketch after
breaking. Click the "Display/Delete Relations" button when the sketch
is active to view relations. There is a drop-down box with filters
for external, defined in-context, locked, and broken references.

 

DUMB QUESTION, BUT WHEN I AM IN EDIT SKETCH, HOW DO I CHANGE PLANES OF
THE SKETCH?

 

You need to be out of the sketch, and then RMB on the sketch feature in the
tree. Select Edit Sketch Plane and pick the new one.

WT

 

YES, I found it after I posted the question, but I do thank you for
responding.