Broken-out Section Scope

Discussion in 'SolidWorks' started by cadman_357a, Dec 10, 2004.

  1. cadman_357a

    cadman_357a Guest

    I have a broken-out section in a assembly drawing. There are some
    components that I do not want to show as sectioned. How do I do this?

    With a section view I can do this by selecting the section view,
    clicking the 'more proporties' button and then use the 'section scope'
    tab to pick the components that I don't want to have cut.

    I can't find a section scope tab anywhere with my broken-out section.
    Is this possible?


    Rob


    p.s. using SolidWork 2004
     
    cadman_357a, Dec 10, 2004
    #1
  2. cadman_357a

    Tonius Guest

    I would do a configuration which contains the cut and use that view in
    the drawing. In the drawing, properties--> hide/show components is also
    quite usefull sometimes.

    -Tonius-
     
    Tonius, Dec 13, 2004
    #2
  3. cadman_357a

    Tonius Guest

    I would do a configuration which contains the cut and use that view in
    the drawing. In the drawing, properties--> hide/show components is also
    quite usefull sometimes.

    -Tonius-
     
    Tonius, Dec 13, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. local scope functions

  2. Section arrows on a broken view

  3. Problem with broken-ot section and hidden edges

  4. Section Scope Problem

  5. Broken out section lost it's sketch?

  6. Broken-out section

  7. Broken-out section

  8. SWX 2007 SP3.1 Broken Out Section

Loading...