BOM Problems with smart fastener SW 03 sp5.0

Discussion in 'SolidWorks' started by Nathan Feculak, Feb 26, 2004.

  1. Nathan Feculak

    Nathan Feculak Guest

    It's my understanding that the order in which the BOM is created is the
    order that the parts are listed in the Feature Manager tree. Why is it that
    I have a few different smart fasteners in the assembly some have a top stack
    LW at first they were shown under the fastener in the BOM, now they have
    moved to the bottom of the BOM list and all my part numbers are in a
    different order. This change happened after I made some changes to the
    fasteners.

    Thanks

    Nathan
     
    Nathan Feculak, Feb 26, 2004
    #1
  2. Nathan Feculak

    Wayne Tiffany Guest

    Do a RMB on the BOM and then properties/control, and see if the checkbox is
    checked for "Row numbers follow assembly ordering." It sounds like it isn't
    because without that checked, a some changes in parts will cause the BOM to
    put them at the bottom.

    WT
     
    Wayne Tiffany, Feb 26, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Toolbox error with 2003 SP5.0

  2. Toolbox Fastener Problems

  3. Rendering with Hide / Show 2003 SP5.1 PW2 not working...

  4. smart fastener inserts itself backwards (reversed) through hole???

  5. How can you save an assembly along with smart fastener feature for transportation?

  6. Dear gentle users of SW2004 - problem with SP03 to SP5 - any help... ?

  7. Smart Fastener not filling all the same holes

Loading...