BOM : duplication of the part list on rebuild

Discussion in 'SolidWorks' started by Primeau, Apr 19, 2005.

  1. Primeau

    Primeau Guest

    Hi,
    I have a problem with my Bill of Materials. I can insert a BOM in a
    drawing, everything is fine with that. But when I rebuild the part or
    the drawing, the listed parts are duplicated in the BOM (and the order
    of the duplicated parts is reversed). Everytime I rebuild the BOM the
    same list of parts is added up.
    I used an Excel BOM modified with my own custom properties except for
    ItemNo and Quantity. Can someone help please.
    Thanks
    JC
     
    Primeau, Apr 19, 2005
    #1
  2. Primeau

    kmaren24 Guest

    Is this 2004 or 2005?
     
    kmaren24, Apr 19, 2005
    #2
  3. Primeau

    Wayne Tiffany Guest

    My only thought is to try it with the stock one that came with SW and see if
    you get the same thing. If not, it's something in your BOM template and you
    will have to go through it step by step. I can also send you one of ours if
    desired.

    WT
     
    Wayne Tiffany, Apr 19, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. list c = list a - list b?

  2. Deleting BOM table without deleting BOM balloons

  3. BOM: margins in BOM-table (embedded)

  4. SW BOM versus Excel Based BOM

  5. New System Rebuild + Great Except Slow "New Part'

  6. SW BOM to Excel BOM

  7. feature rebuilds only after double clicking the rebuild button..........how peculiar!

  8. circular duplication of sketch entities

Loading...