Boat Hull

Discussion in 'Microstation' started by edebraal, Jan 15, 2007.

  1. edebraal

    edebraal Guest

    I am modeling a 120 foot boat and am new to Microstation. Can anyone
    give me some tips about the best way to do the curves in 3d? I have a
    2d AutoCAD drawing of the boat and need to translate that into a 3d
    model. Please help!
     
    edebraal, Jan 15, 2007
    #1
  2. Try using the Place Bspline command with the Method set to Catmull-Rom.
    I recall reading somewhere that that worked well for hulls. I haven't
    actually drawn one though.

    Then you can use:
    Construct Surface By Section Or Network
    To connect the Bsplines into a surface.

    Dan
     
    Daniel MacNeil, Jan 15, 2007
    #2
  3. edebraal

    help_cad Guest

    ha scritto:
    Hello! I regollary use microstation since 1990 and I'sure it's the best
    CAD for a lot of reason.
    ( I hope you're using the v8 version or upper.)
    I' going to shortly answer your question:

    1) open directly the autocad file (dwg or dxf) by microstation
    2) file, export, 3d >> to a dgn file
    3) open the 3d dgn file you've created
    4) I raccomand you to use at least two windows: the top an the
    isometric is enought
    5) set lock boresite

    The fastest way to create 3d elements (solid or surfaces) is extrude
    the linear element you've already created. Pay attention that vector
    would better be cleaned and possibly well connected.(you can find the
    suitiable utilities in microstation)

    do also use the accuracy draw tool, is very useful

    to correctly extrude elements you've to use the lock/unlock depht of
    the right plane in which the elements has to be placed, you can easily
    check it in the isometric view.

    Look also in the help online.

    bye.

    gis_help
     
    help_cad, Jan 15, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.