Blocks

Discussion in 'SolidWorks' started by Jacob Filek, Dec 5, 2003.

  1. Jacob Filek

    Jacob Filek Guest

    Is there any way to "clear" a drawing of the blocks that were inserted?
    I have a drawing that I inserted a few blocks then deleted I closed the
    drawing and closed SW.
    I opened the drawing back up and the blocks are still listed in the "Insert
    Block" property manager.
    Help... :)
     
    Jacob Filek, Dec 5, 2003
    #1
  2. Jacob Filek

    Corey Scheich Guest

    If you look on the design tree there is a feature (if you will) for blocks
    if it has a + sign next to it there is still a block stored in the file. It
    isn't necessarily inserted on the drawing though. Right click the block you
    want cleaned off of your drawing and select DELETE. Now save and your block
    is gone for good.

    Corey Scheich
     
    Corey Scheich, Dec 5, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Select blocks in layout

  2. automatic leaders for autocad attribute blocks

  3. Change text style in blocks.

  4. Make blocks out of custom symbols

  5. Importing CSV data into Blocks??

  6. adding description to blocks

  7. BLOCKS-Text in drawing blocks autoformatting

  8. Help with Properties of Blocks embedded in Blocks

Loading...