Blocks won't print

Discussion in 'AutoCAD' started by AutoCAD, Mar 15, 2005.

  1. AutoCAD

    AutoCAD Guest

    I am doing a layout of a kitchen for renovation. The check plots do not show
    the appliance blocks ( i.e. stove, sink, refridge, etc.) imported from
    Autodesk Symbols 2000. All walls print perfectly. A small custom cabinet I
    drew also plots.
    I am using AutoCAD 2000, on an Acer PC with 1/2 gig of memory, an Intel
    Pentium 1.3. The printer is an HP psc 2175.
    Any suggestions would be appreciated.

    Bill Trott
     
    AutoCAD, Mar 15, 2005
    #1
  2. AutoCAD

    AutoCAD Guest

    I checked all layers and made sure that layer Zero is turned on and will
    plot. All other layers are "on". Still no plot of blocks.

    Bill
     
    AutoCAD, Mar 15, 2005
    #2
  3. AutoCAD

    Paul Caruthers Guest

    can you post it? or part of it?
     
    Paul Caruthers, Mar 15, 2005
    #3
  4. AutoCAD

    RickW Guest

    Were the blocks created on a layer other than 0? and is that block off or frozen or non print?
     
    RickW, Mar 15, 2005
    #4
  5. AutoCAD

    AutoCAD Guest

    The blocks were created on a layer other than 0. All layers are on.
    Thanks

    Bill
    frozen or non print?
     
    AutoCAD, Mar 16, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dwg won't print clearly.

  2. Some lines won't print

  3. Hp designjet 500 won't print in paper space in AUTOCAD

  4. HP laserjet 2500L won't print

  5. Print Manager to batch print DWF files to windpws printer

  6. HP 1050C won't print from model space in LDT 2005

  7. PDF won't print to Designjet

Loading...