Better Engineering & Design: Less Crap

Discussion in 'SolidWorks' started by Bo, Oct 3, 2008.

  1. Bo

    Bo Guest

    No matter how you cut it, in the real world of products, you have to
    get rid of the crap or you can't get your products done right in a
    reasonable amount of time.

    That means getting rid of BS discussions, polemics, and dare I say,
    trolls in the workplace and elsewhere.

    The sooner we dial out and not respond to or acknowledge the people
    with more time than brains, the sooner we get REAL answers and get the
    work out.

    Bo
     
    Bo, Oct 3, 2008
    #1
  2. Bo

    Cliff Guest

    Did you have a point about SW?
    I must have missed it.
     
    Cliff, Oct 3, 2008
    #2
  3. Bo

    jon_banquer Guest

    No matter how you cut it, in the real world of products, you have to
    get rid of the 25 year old technology that SolidWorks is based on,
    otherwise you can't get your products done right in a reasonable
    amount of time.

    That's what Solid Edge with ST is all about.

    The sooner we dial out of 25 year old technology that can't handle
    collaboration or easily and quickly modify non-native solids the
    sooner we get REAL answers and get the work out.

    Jon Banquer
    San Diego, CA
    http://jonbanquer.blogspot.com/
     
    jon_banquer, Oct 3, 2008
    #3
  4. Bo

    Cliff Guest

    A) ParaSolid is NOT 25 years old and has been improved & updated
    over the years. IIRC It was first in production use circa 1992.
    B) SE is ParaSolid too.
    C) YOU did not get SE.
    D) You remain utterly clueless.

    E) Wipe the drool off your keyboard.
     
    Cliff, Oct 4, 2008
    #4
  5. Bo

    Cliff Guest

    It's NOT a CAD/CAM system, idiot.
     
    Cliff, Oct 4, 2008
    #5
  6. Bo

    Cliff Guest

    Collaboration is a two way street.
    Other systems cannot use native SE files.
    Hence you remain a clueless idiot.
     
    Cliff, Oct 4, 2008
    #6
  7. Bo

    jon_banquer Guest

    No matter how you cut it, in the real world of products, you have to
    get rid of the 25 year old technology that SolidWorks is based on,
    otherwise you can't get your products done right in a reasonable
    amount of time.

    That's what Solid Edge with ST is all about.

    The sooner we dial out of 25 year old technology that can't handle
    collaboration or easily and quickly modify non-native solids the
    sooner we get REAL answers and get the work out.

    Jon Banquer
    San Diego, CA
    http://jonbanquer.blogspot.com/
     
    jon_banquer, Oct 5, 2008
    #7
  8. Bo

    jon_banquer Guest

    No matter how you cut it, in the real world of products, you have to
    get rid of the 25 year old technology that SolidWorks is based on,
    otherwise you can't get your products done right in a reasonable
    amount of time.

    That's what Solid Edge with ST is all about.

    The sooner we dial out of 25 year old technology that can't handle
    collaboration or easily and quickly modify non-native solids the
    sooner we get REAL answers and get the work out.

    Jon Banquer
    San Diego, CA
    http://jonbanquer.blogspot.com/
     
    jon_banquer, Oct 6, 2008
    #8
  9. Bo

    Cliff Guest

    The idiot's too much of a clueless coward to
    respond to replies to his idiocy & BS.
    Nor did he get SE it seems.
     
    Cliff, Oct 7, 2008
    #9
  10. Bo

    jon_banquer Guest

    No matter how you cut it, in the real world of products, you have to
    get rid of the 25 year old technology that SolidWorks is based on,
    otherwise you can't get your products done right in a reasonable
    amount of time.

    That's what Solid Edge with ST is all about.

    The sooner we dial out of 25 year old technology that can't handle
    collaboration or easily and quickly modify non-native solids the
    sooner we get REAL answers and get the work out.

    Jon Banquer
    San Diego, CA
    http://jonbanquer.blogspot.com/
     
    jon_banquer, Oct 7, 2008
    #10
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.