Bend Allowance

Discussion in 'SolidWorks' started by bigmouth, Mar 10, 2005.

  1. bigmouth

    bigmouth Guest

    Does anyone have a sample bend table for 304 Stainless I can try? I have
    been playing with k-factors and bend allowance in sw2005 but could never get
    a result to match the outcome on our real-life bend tests.

    Thanks
     
    bigmouth, Mar 10, 2005
    #1
  2. bigmouth

    Not Necessarily Me Guest

    We have pretty good results with .365 as the k-factor for stainless up to
    7ga. BTW .446 works good on c.r.s, h.r.s. and 3000 thru 5000 series
    aluminum.

    Hope this helps,
    Jeff
     
    Not Necessarily Me, Mar 10, 2005
    #2
  3. bigmouth

    bigmouth Guest

    bigmouth, Mar 10, 2005
    #3
  4. bigmouth

    Sean-Michael Adams Guest

    Sean-Michael Adams, Mar 10, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Paths ending with 90 Degree bend less than 1/2 width long problem

  2. Sheet Metal Bend Radius

  3. Sheetmetal bend reliefs - not working

  4. Sheet metal, bend back symetrical

  5. SPINAL BEND

  6. Depicting bend lines for a sheet metal part

  7. Bend Allowance - Formula

  8. Bend Allowance Table

Loading...