AutoCAD R14 Fatal Error Message

Discussion in 'AutoCAD' started by Don Kaminska, Jul 21, 2004.

  1. Don Kaminska

    Don Kaminska Guest

    I'm working on a fairly big drawing. I keep getting "Fatal Error"
    messages and I have to recover the drawing. When I do, part(s) of the
    drawing is missing! This is slowing me down because I have to redraw
    the stuff.

    Is this a lack of memory problem?

    Thanks.
     
    Don Kaminska, Jul 21, 2004
    #1
  2. Try:

    - to stop regenerating after loading by multiple "escape" and to
    save as new file

    - to insert the problem-dwg as a block in a new dwg

    hth

    Thomas
     
    Cadman (remove x), Jul 22, 2004
    #2
  3. Don Kaminska

    Modat22 Guest

    You might have some AEC or Mechanical objects that acad 14 doesn't
    know how to handle. You can attempt to install the object enablers
    floating around for acad 14. You can also try stopping the regen with
    the escape key that was just mentioned and saving the drawing down to
    release 12 format.

    If all else fails ask around and see if someone can recover the
    drawing in 2004 then save it to a release 12 dxf file then open a new
    drawing in 14 and DXFIN the R12 DXF file.
     
    Modat22, Jul 22, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.