AutoCad DWG & DXF 3d models

Discussion in 'SolidWorks' started by Miguel, Oct 28, 2003.

  1. Miguel

    Miguel Guest

    Hi all,
    How come? an AutoCad 3d model not usefull when open into SolidWorks 2003?
    I will only be able to see 30 % of the lines/arcs!

    Any tips

    Best regards

    Kotoma
     
    Miguel, Oct 28, 2003
    #1
  2. Miguel

    Corey Scheich Guest

    If you are converting solids. Export them from AutoCad using ACISOUT. Then
    import the resulting ".sat" file into Solidworks.
    If it is wireframe goodluck! I haven't had any luck converting a 3d
    wireframe model from acad and still have it workable.

    Corey Scheich
     
    Corey Scheich, Oct 28, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Manipulate the element in the DXF from MicroStation, durin DXF are still DXF

  2. Output SW drawing document to autocad.dwg or dxf

  3. Layers From Autocad to SW and then to the dxf/dwg.

  4. save as .dxf or convert .sldprt to .dxf

  5. Easycad (PRT) to Autocad (DXF/DWG)

  6. Converting 2-D DXF to 2-D DXF possible?

Loading...