autocad 2002-cannot dimension in 3d view

Discussion in 'AutoCAD' started by daf, Sep 15, 2003.

  1. daf

    daf Guest

    I've had this problem before. I believe it was a simple system variable. I can't draw a line parallel to an object in isometric view. Nor can I measure the side of this object. The dimension line does not appear.
    daf
     
    daf, Sep 15, 2003
    #1
  2. daf

    Walt Engle Guest

    Have to set ucs parallel to side or object, thus ucs, x, 90, etc.
     
    Walt Engle, Sep 15, 2003
    #2
  3. daf

    OLD-CADaver Guest

    Dimension "land" at the Z=0 of the current UCS XY plane. Rotate the UCS to match the plane of your dimension and reloctae the origin to the Z plane in which the dimension need to reside.
     
    OLD-CADaver, Sep 15, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Product View Express - Cannot see original ProE file's decals/colortexture

  2. Dimension from Detailed view to Section view?

  3. "View cannot be unfolder any further" ...what!?

  4. 2002 dimension suffix suppresion

  5. autocad 2002 vs autocad 2004...

  6. Domain User cannot login Windows XP after installing AutoCAD 2005

  7. AutoCAD 2002 with ProCAD 2002

  8. Question about AutoCAD 2002 dimension extension lines

Loading...