ATI graphic cards

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by Magnus Lorin, May 27, 2004.

  1. Magnus Lorin

    Magnus Lorin Guest

    Hi

    Are there any problems with ATI-cards for ProE ?
     
    Magnus Lorin, May 27, 2004
    #1
  2. Magnus Lorin

    David Janes Guest

    : Hi
    :
    : Are there any problems with ATI-cards for ProE ?
    :
    :
    Here's what PTC says about ATI cards:

    http://www.ptc.com/partners/hardware/current/proe.htm#gi

    You're free to ignore them, but there are more junk ATI cards for Pro/e than good
    ones, obviously, since only the XGL card qualifies. I have heard of cheaper cards
    that you could soft quadro to bring them OR their driver up to an XGL standard.
    But this is something you'd have to look into it. These people could probably tell
    you about it:

    http://www.guru3d.com/rivatuner/softquadro/

    David Janes
     
    David Janes, May 28, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ATI FireGL V3100 Video card performance issues

  2. Linux, ATI FireGL X1

  3. ati vs nvidia in notebooks

  4. WF2 and ATI Radeon Mobility GPU

  5. Urgent question about ATI Mobility Radeon X300

  6. Do Graphic Cards impact Rebuilds and geometry creation

  7. Any fix for the disappearing sketches issue on ATI cards?

  8. ATI Fire GL video cards

Loading...