Assymetric tolerance

Discussion in 'AutoCAD' started by Magnus, Feb 13, 2004.

  1. Magnus

    Magnus Guest

    Does anyone know how to place an assymetric tolerance (ex. +0,5/-0,3)
    one above the other without having to use the text tool?

    Thanks!
    Magnus
     
    Magnus, Feb 13, 2004
    #1
  2. Magnus

    B. W. Salt. Guest

    In R14 you use 'Format' 'Dimension Style' 'Annotation' 'Tolerance' and
    under 'Method' select 'Deviation'. Set the two values as Upper 0.5 and
    Lower 0.3. The 'plus' and 'minus' signs are inserted by AutoCAD.
     
    B. W. Salt., Feb 13, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dimension Tolerance Menu Tool

  2. Find an Arc using ssget at some tolerance

  3. Diva - Tolerance for DRC checks

  4. How to adjust the hight of symmetric tolerance-text?

  5. tolerance text height problem

  6. changing dimension decimal places changes tolerance values.

  7. Hole note and Tolerance frames

  8. Tolerance - Dihedral and Tangency?

Loading...