Assy Component Selection Bug

Discussion in 'SolidWorks' started by AlanC, Dec 16, 2004.

  1. AlanC

    AlanC Guest

    Since moving to 2005 I'm having problems highlighting components in
    assemblies by left clicking them in the tree. Has anyone else had this
    problem? It seems to only happen intermittantly and I wonder if some
    setting has toggled. The selection filter also seems to repond badly
    at times. Comments.
     
    AlanC, Dec 16, 2004
    #1
  2. AlanC

    CS Guest

    If you hit the wrong key on the keyboard it may toggle a filter on and off.
    I always have a problem with E I hit it all the time when zooming because
    years ago I would hit ZE enter in Autocad to zoom extents and I periodically
    try to do the same in SW even still.

    Corey
     
    CS, Dec 16, 2004
    #2
  3. AlanC

    Mark Reimer Guest

    I have had the left click problem in assembly trees from time to time in
    2004. A single left click does nothing, but a double click will sometimes
    work. Right clicking seems to work ok though during those times. What I
    usually do to clear it up is open a part file, then go back to the assembly
    file. It usually works.

    --Mark
     
    Mark Reimer, Dec 16, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. component display in assy

  2. Mate References - no assy to assy

  3. CHANGING COLOR ON ASSY LEVEL...BUG?

  4. Reference Component/Configuration in Assy equation?

  5. Dilemma on using Assy sketch while wanting to use the parts in context in another assy.

  6. Dilemma on using assy layout sketch and wanting to use the parts in context in another assy.

  7. Balloon sub-assy based on the BOM of the parent assy?

  8. New to Inventor and want to move parts from sub-assy into top level assy and retain the constraints

Loading...