Assembly

Discussion in 'SolidWorks' started by News wanadoo, Oct 11, 2003.

  1. News wanadoo

    News wanadoo Guest

    I make a assembly01 with 4 part.the 4 part are drived with a sketch in the
    assembly.I make many configuration of the assembly.
    then i make a new assembly02 and i will insert different configuration of
    the assembly01 but they appaer even the same configuration.
     
    News wanadoo, Oct 11, 2003
    #1
  2. News wanadoo

    Sporkman Guest

    Please pose the question in your native (French) language. There are
    others here who will understand and (if they don't know the answer
    themselves) will most likely translate it so that we non-French-speakers
    can understand it.
     
    Sporkman, Oct 14, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Chip Assembly and Pad Assembly in ICC???

  2. Exploding sub-assembly in a assembly

  3. Assembly and Sub-Assembly BOM

  4. Exporting Assembly using assembly coordinate

  5. Design table generated assembly does not stick to its table parameters inside another assembly

  6. reoder assembly pattern features (assembly)

  7. How to include parts of main-assembly in drawings of sub-assembly?

  8. ASSEMBLY PERFORMANCE: Poisoned Assembly

Loading...