assembly to part sketch

Discussion in 'SolidWorks' started by mo, Jan 18, 2008.

  1. mo

    mo Guest

    This is probably easy, but could someone tell me how to use an
    assembly sketch, for a hole, to insert the hole into the part as a
    part feature.

    Thanks Mo
     
    mo, Jan 18, 2008
    #1
  2. mo

    That70sTick Guest

    Edit the part in the assembly. Start a sketch. Select the circle in
    the assembly's sketch and use "Convert entities".

    I usually start the part sketch within the part so that I do not
    accidentally put the sketch plane on a surface outside of the part.
     
    That70sTick, Jan 18, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Assembly part number vs. Detail part number

  2. Is it possible to insert a sketch create in an assembly to a part environment?

  3. sketch relation remains attached to actual sketch elements

  4. part sketch relation in an assembly design table?

  5. Is it possible to create a mirror sketch based on an existing sketch?

  6. can't mate part level point or sketch point to assembly level sketch (arc)

  7. Using a dimension of a part to pull a part into an assembly

  8. Assembly sketch, lock to sketch not working

Loading...