Anybody Use a Microscribe with SW

Discussion in 'SolidWorks' started by Rocko, May 7, 2004.

  1. Rocko

    Rocko Guest

    I was curious if anybody has used a microscribe digitizer with the
    solidworks plugin. Did it
    work well , what were the problems with the software or hardware ect...
    Thanks in advance.
     
    Rocko, May 7, 2004
    #1
  2. Rocko

    MM Guest

    Rocko,

    I remember when RevWorks came out people were making allot of noise about
    it. It worked with Microscribe. It could be that at that time SW wasn't very
    good at handling the spline data it produced or something else, but you
    don't hear much about it anymore. They are still in business though
    http://www.revworks.com/default.htm

    You might get the some of the info you need there. Real world success
    stories might be a bit more difficult.

    Regards

    Mark
     
    MM, May 9, 2004
    #2
  3. Rocko

    Tim Guest

    we used to use a microscribe for reverse engineering but found the accuracy
    (and repeatability) very poor. Ended up getting a Faro arm. We also tried
    Revworks but had a hard time justifying it. Much easier to use Rhino to
    gather the data and import in SW.
     
    Tim, May 10, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. does anybody know how to use Nanosim with EDIF files?

  2. Anybody knows how to use system call in c++ to call ocean?

  3. Anybody experienced with HP 350c plotter?

  4. Anybody run SolidWorks on a laptop with nvidia geforce go 7400 graphics?

  5. Microscribe and SolidWorks

  6. anybody use a desktop easel?

  7. Immersion Microscribe 3D

  8. Anybody use AutoCAD 2000 yet now?

Loading...