Angle in block

Discussion in 'AutoCAD' started by srinivasan, Nov 19, 2004.

  1. srinivasan

    srinivasan Guest

    Hello all

    I created a line at 45 deg and converted the line to a block.
    i inserted the block in the drawing at angle 0.

    Now i exactly want the angle of the block with respect to X axis,how to calculate this angle.

    Thanks in advance.
    Sri
     
    srinivasan, Nov 19, 2004
    #1
  2. srinivasan

    srinivasan Guest

    Hello all

    I created a line at 45 deg and converted the line to a block.
    i inserted the block in the drawing at angle 0.

    Now i exactly want the angle of the block with respect to X axis,how to calculate this angle.

    Is there any way.

    Thanks in advance.
    Sri
     
    srinivasan, Nov 22, 2004
    #2
  3. srinivasan

    Jorge Jimenez Guest

    You mean the angle of the line ??
    insertion angle + 45
     
    Jorge Jimenez, Nov 22, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. defining a block in a lisp and check if the block is already defined in the drawing

  2. Block Insert Angle

  3. Get block and then erase block

  4. Redefine block - retreiving and passing block name.

  5. Old Block to New Block

  6. Clone a Block and Extract Block DB

  7. Mental block: Getangle relative to another angle

  8. Using "Align Angle" or "Mate Angle" in assembling

Loading...