ams designer missing libvpi.so and libpli.so?

Discussion in 'Cadence' started by Erik Wanta, Sep 29, 2003.

  1. Erik Wanta

    Erik Wanta Guest

    I am getting the following warnings when running AMS Designer. I
    can't find libvpi.so and libpli.so in the LDV installation directory.
    Any ideas?

    Building instance overlay tables:
    ncelab: *W,DYNLIB: Could not load the library 'libvpi', because of...
    ld.so.1: ncelab: fatal: libvpi.so: open failed: No such file or
    directory.
    ncelab: *W,DYNLIB: Could not load the library 'libpli', because of...
    ld.so.1: ncelab: fatal: libpli.so: open failed: No such file or
    directory.
     
    Erik Wanta, Sep 29, 2003
    #1
  2. Erik Wanta

    Partha Guest

    Erik,
    There are a few solutions in sourcelink for the problem you describe.

    try 11028026 for a start..
     
    Partha, Sep 30, 2003
    #2
  3. Erik Wanta

    praveen Guest

    Hi Erik,

    I do not know if any body answered your question earlier.

    One thing i have noticed looking at the error message you have is, if
    you have not set LD_LIBRARY_PATH as a shared library environment
    variable, then this type of error may come up.

    Hope this helps,

    Praveen
     
    praveen, Sep 30, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. AMS Designer & nlAction

  2. AMS Designer tcl script mode determination?

  3. VHDL-Ams AMS Designer

  4. config cellviews in Hierarchy Editor vs. VHDL configurations for AMS Designer i.e. ncsim

  5. Matlab data types in AMS-Designer

  6. Virtuoso: missing solder...not missing

  7. AMS Designer Setup

  8. SW2008 BOM - Missing Items - missing?

Loading...