AEC Blocks

Discussion in 'AutoCAD' started by James, Aug 12, 2003.

  1. James

    James Guest

    I need to change some of the blocks in design center so they do not require
    me to pick an object in the drawing to insert. A good example would be the
    wall tag, I need to the tag and the line that inserts with it.

    Any help would be greatly appreciated.

    Thanks,
    -James
     
    James, Aug 12, 2003
    #1
  2. James

    CJ Follmer Guest

    The AEC tags are meant to attach themselves to the object they are suppose
    to reference. I'm not sure it is easy or possible to modify the AEC
    commands to not attach themselves to the AEC Object. (though i could be
    wrong) Your best bet is to make your own lisp routines that will do what
    your asking.


    CJ
     
    CJ Follmer, Aug 12, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Copybase causing Aec application to load

  2. AEC Dwg scale and block inserts

  3. AEC 5.1

  4. Can't edit AEC objects in Properties Dialog Box (ADT3.3)

  5. objects AEC with ADT

  6. AEC win,door in ADT3.3

Loading...