Accuracy with HP LaserJets

Discussion in 'AutoCAD' started by ChadPen, Apr 30, 2004.

  1. ChadPen

    ChadPen Guest

    Problem - 10" line doesn't come out as 10" on all of our printers. Extremely more noticeable with half sheets (11x17). Unfortunately it seems to be a problem with all printers and not just a specific one. How hard coded is the scaling in the HP laserjets - HP8150 or HP8550? Is there a way to adjust this?

    Thanks for any help
    -Chad
     
    ChadPen, Apr 30, 2004
    #1
  2. ChadPen

    Rich Guest

    Have you calibrated the printers? This would be step one. If you've done
    that then I dont know.

    Rich
     
    Rich, Apr 30, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How's the accuracy about simulation MOS working at subthreshold region?

  2. Which accuracy should I set? (Spectre Simulation)

  3. Extraction Accuracy : Assura rcx vs Fire & Ice

  4. setting working unit accuracy

  5. What is relative accuracy and absolute accuracy?

  6. CQ: Relative accuracy and datum features

  7. SolidWorks accuracy

  8. Draft anaylsis accuracy question?

Loading...