Acad2000 and print server Dlink-310p+ troub. with HP designjet 500

Discussion in 'AutoCAD' started by pluton, Jan 11, 2005.

  1. pluton

    pluton Guest

    On the win2000 proff SP4 when plotting sending to the HP DesignJet 500 ACAD
    2000 stop responding. Plotting can't start when is acad opened.
    I must manually shoot down acad session , and then plotting go.
    plotupdate is instaled.

    HP designjet 500 is configured as network printer with Dlink 310p+ card via
    printer port.

    from win xp and acad 2000 working without these problem.

    any suggestion?

    (from model space or layout is same problem). Directly or spoled print is
    tested, but with same, negative result.
     
    pluton, Jan 11, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. OT - HP DesignJet 500

  2. HP designjet 500 plus

  3. WinXP problems with HP DesignJet 350C & ACAD2000

  4. HP DesignJet 500 + R14 + win98 Q

  5. AutoCAD 2008 + HP Designjet 500 Issues

  6. DesignJet 500 and ACad 2Ki

  7. Hp designjet 500 won't print in paper space in AUTOCAD

  8. Compare Designjet 500 with 130NR

Loading...