Acad 2005 printing problems

Discussion in 'AutoCAD' started by Damian Callaghan, Feb 3, 2005.

  1. Damian Callaghan

    Damian Callaghan Guest

    Since introducing Acad 2005 I am have problems printing to the two printers I'm connected up to.They are 1)OKi C9300 (A3 Size) and 2) a Brother HL-1430(A4 size).Print quality is poor,monochrome comes out a grey scale and color is very feint.I'm assuming its a driver problem but I'm lost to where I can get one.Can anyone help or am I wrong in my assumption?
     
    Damian Callaghan, Feb 3, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Printing from Virtuoso (or printing GDSII)

  2. Wildfire 2005/UG 2005/Ansys 2005/ Catia v5r15

  3. dwgeditor 2006 Printing Problems

  4. Acad 2004s' FLEXlm controling acad 2004 --- AND --- acad 2002 license's

  5. Printing Says 11x17 but its printing 8x11

  6. printing problems with ACAD 2005

  7. Printing Problems in 2005

  8. Good samaritian anyone? Need to convert Acad 2005 file to Acad 2002 format.

Loading...