ACAD 2004 and HP750C

Discussion in 'AutoCAD' started by Jeff, Feb 12, 2004.

  1. Jeff

    Jeff Guest

    I am having trouble getting ACAD 2004 to plot properly on an older model
    HP750C. I am unable to control line weight at all. I change the lineweight
    setting in the plot style table editor, but it has no affect. I can,
    however, change the screening of the lines via the Screening option. Does
    anyone know what may be the issue?

    Thanks.
     
    Jeff, Feb 12, 2004
    #1
  2. Jeff

    patrick_aps Guest

    I would advice setting up the HP with a HPGL/2 driver, plot to file and look with a HPGL/2 viewer like BITVIEW if the widths are in the HPGL/2 file.
    If not: problem is in AutoCAD/Driver
    If so: problem is in Plotter (settings)
     
    patrick_aps, Feb 13, 2004
    #2
  3. Jeff

    Jeff Guest

    No. Mostly just lines with no width set. Line weight is established through
    layer assignments and plot config table.
     
    Jeff, Feb 13, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HP750C plus with Windows XP

  2. import Acad 2006 into Acad 2004

  3. Acad 2004s' FLEXlm controling acad 2004 --- AND --- acad 2002 license's

  4. Plotting a plot file to an HP750c plus

  5. AutoCAD Drivers for HP750c+ and Windows 2000

  6. ADT 2004/HP750c plotting

  7. need some help for HP750C

  8. Suggestions for replacing an old Calcomp Plotter - HP750C?

Loading...