Acad 2002 - Toggle fillmode with button

Discussion in 'AutoCAD' started by Fieldguy, Sep 28, 2004.

  1. Fieldguy

    Fieldguy Guest

    How do I define a button that will toggle FILL mode; if it is on turn it
    off, if it is off turn it on, then regen?
     
    Fieldguy, Sep 28, 2004
    #1
  2. Fieldguy

    Jürgen Palme Guest

    (setvar "FILLMODE" (boole 6 1 (getvar "Fillmode")));regen


    HTH
    Juergen
     
    Jürgen Palme, Sep 28, 2004
    #2
  3. Fieldguy

    Paul Turvill Guest

    ^C^C(setvar "fillmode" (- 1 (getvar "fillmode")));regen
    ___
     
    Paul Turvill, Sep 28, 2004
    #3
  4. Fieldguy

    Fieldguy Guest

    Awesome. Thank you very much.

     
    Fieldguy, Sep 28, 2004
    #4
  5. Fieldguy

    Fieldguy Guest

    Thank you. A bit different (just enough to be interesting). What is ^C^C
    for? Is it transparency, or cancel active command?
     
    Fieldguy, Sep 28, 2004
    #5
  6. Fieldguy

    Jürgen Palme Guest

    Yes
     
    Jürgen Palme, Sep 28, 2004
    #6
  7. Fieldguy

    Fieldguy Guest

    Thanks again, both of you. I'm using (- 1 (getvar "Fillmode")) because I
    can't remember exclusive or.
     
    Fieldguy, Sep 28, 2004
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Snap Toggle at bottom of drawing editor 2002

  2. Toggle layer on/off with single toolbutton

  3. Viewport Layer Freeze Toggle Button

  4. Logitech 3 -button mouse versus 3-button w wheel

  5. Mouse 'back' button as middle button in PRO/e Wildfire

  6. Acad 2004s' FLEXlm controling acad 2004 --- AND --- acad 2002 license's

  7. AutoCAD 2002 with ProCAD 2002

  8. Good samaritian anyone? Need to convert Acad 2005 file to Acad 2002 format.

Loading...