about hspiceS view of switch

Discussion in 'Cadence' started by wxy214, Jul 7, 2006.

  1. wxy214

    wxy214 Guest

    Hi all,

    When I use composer to accomplish the schematic, I use hspice to
    run simulation in cadence's ADE , but if I want to use the "switch"
    device from the analogLib library, I find it has no hspiceS view of it,
    how can I add the hspiceS view to switch so that I can use hspice to
    run simulation correctly in ADE?

    appreciate for any helps!
     
    wxy214, Jul 7, 2006
    #1
  2. wxy214

    Bernd Fischer Guest

    Two solution which could probably work.

    1. Copy the cell switch to a library where you have write access to.
    In this library copy the cell view spectreS of the switch cell to hspiceS.
    Use the copied cell.
    Maybe you have to add hspiceS simInfo to the CDF of these Cell too.

    2. Change the switch and stop view list under ADE -> Setup -> Environment.
    Add the view name spectreS direct behind hspiceS, in both lists.

    Just a guess, I don't have a Hspice integration to test it.

    Bernd
     
    Bernd Fischer, Jul 7, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to use .data command in hspiceS interface

  2. pass the value of a parameter from "init.s"(cdsSpice) to hspiceS

  3. Create a bindkey to switch between append mode and read-only modeof current view

  4. SKILL: Virtuoso command to Save View/Restore View WITH Hierarchy

  5. I have a question about changing view orientation...

  6. Rotating a view about a chosen axis.

  7. Is ther something about platting an X-REF and Color I dont knoe about?

Loading...