About customing the Hole charts in Pro/E WF

Discussion in 'Pro/Engineer & Creo Elements/Pro' started by edoardo fiorani, Sep 29, 2004.

  1. Hi to everybody.I'm a Begginer in Pro/E WF.Some MOnths ago i wrote you and
    your advice was very useful.I'd like to custom the hole charts.I read the
    help online where Pro/E developers adviced to update the configuration file
    " hole_parameter_file_path".I know that this is a very "stupid" question,but
    how could I do it??.I'm waiting for a your reply.
    Kind regards
    Edoardo
     
    edoardo fiorani, Sep 29, 2004
    #1
  2. edoardo fiorani

    David Janes Guest

    : Hi to everybody.I'm a Begginer in Pro/E WF.Some MOnths ago i wrote you and
    : your advice was very useful.I'd like to custom the hole charts.I read the
    : help online where Pro/E developers adviced to update the configuration file
    : " hole_parameter_file_path".I know that this is a very "stupid" question,but
    : how could I do it??.I'm waiting for a your reply.

    The hole tables you are referring to are located, by default, in
    <loadpoint>/text/hole. Pro/e comes with three such files called iso.hol, unc.hol
    and unf.hol (one in metric units, the other two in US Customary).

    These are just ascii text files so you can edit the values with any editor that
    can read and save plain text. But it doesn't matter to Pro/e where you edit them.
    You could leave them where they are and edit them there. It is a good idea,
    however, to copy them somewhere else ~ a stable data drive, for instance ~ any
    place that will not be overwritten by a software reinstall or upgrade.

    The option you referred to, hole_parameter_file_path, lets you specify another
    directory path in the config.pro file which loads your customized hole tables. It
    seems like this is a new option because the Browse button is grayed out when you
    type in the option name. For other options which require a directory path as the
    option value, the Browse button lets you browse to the directory, press OK and
    enter the path as the option value. Currently you are required to fill in the
    value for hole_parameter_file_path manually. I haven't tried it, so I don't
    warrant that it works. Let us know how you fare.

    David Janes
     
    David Janes, Oct 1, 2004
    #2
  3. edoardo fiorani

    Steve Guest

    You can also set the config.pro setting "hole_diameter_override" to
    Yes, allowing you to select other diameter sizes for varoius clearance
    and tapped holes.

    Steve
     
    Steve, Oct 1, 2004
    #3
  4. thank you so much.
    Edoardo
     
    edoardo fiorani, Oct 3, 2004
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.