3D lemon squeezer question

Discussion in 'AutoCAD' started by Sledgehammer, Nov 30, 2003.

  1. Sledgehammer

    Sledgehammer Guest

    Sledgehammer, Nov 30, 2003
    #1
  2. Sledgehammer

    PTD Guest

    Yes
    draw in 2D a quarter section of this "oval" as a closed area.
    Bpoly it to get a region.
    revolve it 360 degrees to get a 3d model of this " oval"

    Do this again , only a little bit bigger in diameter and revolve it say 5
    degrees.
    make an array 360 degrees of this 3d model to get your rims on the oval.
    array = say 12 rims
    place the first oval and the array rims in each other and union.

    The legs:
    make with closed 2d lines a leg
    extrude it.
    Array it on 360 degrees with a total of 3 legs.
    place the legs on the 3d oval.

    good luck!
    Paul
     
    PTD, Nov 30, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Possibly a silly question: ObjectDBX

  2. dimension varible question..

  3. 1st question

  4. 2nd question

  5. Hatch customize question

  6. Startup Suite Question & Adding Folders To path Question

  7. 3D lemon squeezer

  8. ACad LT2005 - non rectangular ViewPort Question + UCS question

Loading...