3d buell part files

Discussion in 'SolidWorks' started by G. Hagen, Dec 9, 2004.

  1. G. Hagen

    G. Hagen Guest

    Hello,

    I'm looking for 3d parts from Buell motorcycles. Especially X1 Lighting
    parts from 2000
    Can anybody give me some parts or some links to parts?
    I'm trying to build my bike in SW.
    I know the bike was designed with SW, so there must be some parts somewhere.

    Thanks
     
    G. Hagen, Dec 9, 2004
    #1
  2. G. Hagen

    CS Guest

    I am sure the origionals are proprietary good luck though.

    Corey
     
    CS, Dec 9, 2004
    #2
  3. G. Hagen

    MM Guest

    Are you sure ??

    I thought it was designed in Pro-E (H.D. Standard) and Think 3.

    Mark
     
    MM, Dec 9, 2004
    #3
  4. G. Hagen

    Steve Mackay Guest

    The X1 lightning parts were created with Pro/E. I know, i did the mold for
    the X1's airbox. I too am looking for some models for some Buell models.
    Specificly the S3's fairing and saddlebags. Good luck, those models may be
    tough to get.

    The newer Buell parts(the XB series) were designed in Think3.
     
    Steve Mackay, Dec 9, 2004
    #4
  5. G. Hagen

    G. Hagen Guest

    Steve,

    I saw my reseller of SW had some pictures of the X1 in his computer.
    That was the reason I thought the bike was designed with SW.
    Doesn't matter.

    The airbox you worked on is the part the most people in Holland remove when
    the buy a X1.
    I'm sorry to tell you.

    Are you a Buell driver?
     
    G. Hagen, Dec 10, 2004
    #5
  6. G. Hagen

    neil Guest

    G.Hagen,
    did you realise that you sent me a reply concerning your recent post here,
    rather than using 'reply group'? Perhaps you could post your SW details here
    so people can help you if it is still reqd.
    regards,
    neil
     
    neil, Dec 10, 2004
    #6
  7. G. Hagen

    Steve Mackay Guest

    Your reseller had an imported assembly then. The only parts I've ever
    gotten from Buell, and I've had quite a few, since I live/work 20 minutes
    from the Buell factory, is ProE and Think3.

    Don't be sorry, I don't care. I got paid for it :)
    Umm, yeah, you could say that.
    Here's my collection
    http://tinyurl.com/484v7
     
    Steve Mackay, Dec 10, 2004
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Part could use mating part as background

  2. Need help with inserting a part into a new part

  3. Assembly part number vs. Detail part number

  4. Copy Paste Surface from one part to a new part

  5. Translate and Rotate Part in Part problem in SW2003

  6. How can I delete this external reference (mirrored part using plane of another part)

  7. Find Out Why Eric Buell Uses Think3 Rather Than SaladWorks

  8. naming convention of part files for assembly files

Loading...