2D snapshot of the drawing view?

Discussion in 'SolidWorks' started by Tomas, May 15, 2008.

  1. Tomas

    Tomas Guest

    Is there a way to disconnect one view in the drawing from its model and
    explode (make a snapshot) into a 2D lines?

    thanks,
    Tomas
     
    Tomas, May 15, 2008
    #1
  2. Tomas

    TOP Guest

    It can be done in eDrawings.

    TOP
     
    TOP, May 17, 2008
    #2
  3. Tomas

    Engineer Guest

    You can save the drawing as .dwg. That should solve your purpose.

    Deepak
     
    Engineer, May 19, 2008
    #3
  4. Tomas

    Eddie Guest

    Tomas,

    Window select your view, then select "Copy to DWGeditor" from the Edit
    pull-down menu. Next, paste into DWGeditor, select all again, then
    Ctrl C, back to SW and Ctrl V.

    Couple of notes/tips here:
    - Prior to starting the process start DWGeditor
    - Be sure to create an "empty view and activate it when pasting back
    to SW

    It is a 4 Step process that Pro/E does in 1 Step, it's called
    "Snapshot".
     
    Eddie, May 19, 2008
    #4
  5. Tomas

    Tomas Guest

    Thanks to everybody who responded to this issue.

    Tomas

    Tomas,

    Window select your view, then select "Copy to DWGeditor" from the Edit
    pull-down menu. Next, paste into DWGeditor, select all again, then
    Ctrl C, back to SW and Ctrl V.

    Couple of notes/tips here:
    - Prior to starting the process start DWGeditor
    - Be sure to create an "empty view and activate it when pasting back
    to SW

    It is a 4 Step process that Pro/E does in 1 Step, it's called
    "Snapshot".
     
    Tomas, May 28, 2008
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. save snapshot in simvision... can't view waveform in wavescan

  2. snapshot of schematics made in Cadence IC 5033?

  3. Drawing View scale and Scale indicator on the page doesn't match.

  4. What does this message "The geometry which serves as the origin of the detailed view "A", on sheet X

  5. How do you delete a custom view in the View Orientation dialog box?

  6. is there ways to move the paper instead of the drawing in the layout format?

  7. How to add a PAPERSPACE VIEW to the view collection?

  8. Zenworks Snapshot AutoCAD LT

Loading...