2005 plotting disables ADT3.3 plotting

Discussion in 'AutoCAD' started by cspellman, Dec 14, 2004.

  1. cspellman

    cspellman Guest

    Trying to setup 2005 while running 2002 (ADT 3.3), after plotting in 2005, my 3.3 plotting fails.

    WE have three plotters, HP 1050, 750 & 650, with page setup created for both 2005 and 2002.

    I have new pc3 files, seperate folder paths, etc., but when I go back to 2002, it won't recognize my old pc3 files. If I then write over my 2002 pc3 files with my backup, it was working. BUt now, I still cannot plot to the 750 plotter.

    Is 2005 writing something to the registry? or somehow writing something to the pc3 files in the 2002 folder?Any ideas?
     
    cspellman, Dec 14, 2004
    #1
  2. cspellman

    Dwane Lindsey Guest

    I would agree with Dean....you may be mixing them up somehow. I have 3.3
    and 2005 loaded and have been able to plot to from each of them without
    trouble. I have pc3's setup for each version in seperate folders. Make
    sure your plotter paths are pointed to the correct folders.
     
    Dwane Lindsey, Dec 15, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wildfire 2005/UG 2005/Ansys 2005/ Catia v5r15

  2. Architectural Desktop 3.3 (ADT3.3).Dual processor or not. Old question.

  3. Can't edit AEC objects in Properties Dialog Box (ADT3.3)

  4. AEC win,door in ADT3.3

  5. plotting in ADT3 prints a message "PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"

  6. ADT3.3 '_copyclip problem...

  7. Can't edit AEC objects in Properties Dialog Box (ADT3.3)

Loading...