Have you any suggestion about a good 20"-21" LCD display monitor for CAD? TX e.
There's a recent thread about this in comp.cad.solidworks. The topic is 'HP 23" L2335 display opinions?'. Rather than try to copy all the posts here I recommend just subscribing to that newsgroup and reading the whole thread, but one important theme in the thread is that it's important to have a fast enough response time. 16ms is recommended. Some displays have response time over 25ms and that results in a good bit of "ghosting" when used for CAD applications. Mark 'Sporky' Stapleton Watermark Design, LLC www.h2omarkdesign.com
For CAD-2D applications the response time is not so important (even for most CAD-3D tasks).... More important is contrast, brightness, good resolution and good graphic adapter with DVI connection (3D Labs WildCat, NVIDIA Quadro FX or Matrox) 25 ms response time is good enough (bigger LCDs >>> 21" usually have longer time response - but it is not a big problem)... Ofcourse it's better to have 16ms or 12ms - but IMHO it is not the most important thing in LCD display!!. BTW. I recommend EIZO and iiYama LCD displays - they are perfect ! Best Regards, J. Jarocki