2 part question - path/rect --> pin & CCAR power route

Discussion in 'Cadence' started by rick, Sep 23, 2009.

  1. rick

    rick Guest

    This is a 2 part question.....

    Goal: connect a very large multi-layer power grid with via's down the
    blocks where the X and Y paths intersect.
    My first thought was to use the CCAR

    1) is it possible to create/convert a path/shape to a pin with
    connectivity? This would be helpful so I dont have
    to tag every bus as a trunk

    2) Has any tried using CCAR for this function?

    Thanks
     
    rick, Sep 23, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. TLF Power Modelling & Power Simulation

  2. Analog power / Analog clean power?

  3. difference between an instance terminal, terminal, pin, and instance pin?

  4. Schematic pin to pin tracer

  5. Hierarchical place and route with Encounter (power routing to blocks)

  6. Can SRoute route to the line shape pin of Vdd and GND?

  7. Creating layout pin, where do "pin name" go in GDS out?

  8. Basic Rect to Sweep Fillets

Loading...