11290C Printer AutoCAD LT and Xp

Discussion in 'AutoCAD' started by Engelhard, Dec 2, 2004.

  1. Engelhard

    Engelhard Guest

    Dear all,

    I have a HP 1120C deskjet printer. It works fine. However there is a but.

    The but is that when trying to print an A3 plot, it looks fine on plot preview but when it comes down to printing all it does is print it in the centre barely to A4 size. Looking at the discussion points it seems to be a problem to there not being a driver for the printer as it is no longer supported by HP beyond WIN 2000.

    Can anyone kindly give me some definite advice that the correct course of action is to buy a new up to date HP A3 printer so at least I can respond positively to my purchasing department and justify its purchase?

    Or is there a way around this problem.

    Thank you for your time in reading my issue and I look forward to looking at your responses.

    Kind regards

    Alex
     
    Engelhard, Dec 2, 2004
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. XL and AUTOCAD and Printer

  2. Printer Config. in Autocad 2004

  3. Printer AND plotter recommends

  4. Printer/Plotter box and "name"= still cannot get a good answer

  5. New A3 / A4 format printer required... What's the best Performance and Value

  6. AutoCAD loses printer settings and closes

  7. AutoCAD® 2005, AutoCAD 2006 and AutoCAD 2007 products freezing on launch

Loading...