0,0 not 0,0

Discussion in 'AutoCAD' started by Coro, Rob, Jul 13, 2004.

  1. Coro, Rob

    Coro, Rob Guest

    hi all,

    i have 2 drawings - ground floor and first floor. when i do an ID on a
    point on the grid i get the same readings for both drawings however,
    when i xref one into the other or both into a new drawing they come in
    in different locations. i've checked they're both using world UCS and
    the same units. any ideas? i thought with autocad 0,0 was always 0,0?

    cheers
    rob
     
    Coro, Rob, Jul 13, 2004
    #1
  2. Coro, Rob

    Tom Berger Guest

    UCS? INSBASE?

    Tom Berger
     
    Tom Berger, Jul 13, 2004
    #2
  3. Coro, Rob

    Coro, Rob Guest

    insbase, that's the bugger.

    thanks tom

    rob

    -----Original Message-----
    From: Tom Berger [mailto:]
    Posted At: 13 July 2004 12:24
    Posted To: autocad
    Conversation: 0,0 not 0,0
    Subject: Re: 0,0 not 0,0


    UCS? INSBASE?

    Tom Berger
     
    Coro, Rob, Jul 13, 2004
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Block atts not showing up when xref'd...

  2. why would a part. menu not load

  3. if statement not recognizing variable setting

  4. 32 flag of group 70 not set for "not found" xref??

  5. SOS! SAVE ME! cdsSpice could not extract netlist: ERROR: NODE/NET IS NOT ON KEEP LIST AND NOT IN WSF

  6. AutoCAD - Hatching in Model Space not displayed in Paper Space and not printing.

  7. text window is not docked (not command line)

Loading...